combine two Segment

[tran tuan]

How to combine two Segment into one segment?


example: Combine two line into one line


View attachment 1997


Thanks for your help


Regard


Tuan

 

[Israr]

Take a course on workng in sketcher mode. Under the trim icon you can see the join icon.


Israr
Edited by: Israr

 

[AHA-D]

Take a course on workng in sketcher mode.


Israr

OK, had my laugh, but the situation could also be the result of imported geometry in which case you need to solve it. I did some testing, because I never meet this condition. When the lines are part of a larger sketch for a protrusion then ProE solves the situation itself : the plane created is a single one, not a split one. But the situation looks cleaner with a single line, so I trimmed one of both line segments up to the next (I suppose you have other geometry connected to form a closed loop) and deleted the part that is superfluous by the trimming. Trimming away one of both lines didn't even invalidate the rounded solid I had made based on the sketch.


Alex

 

[damiaptr]

try to use replace command