Dimensioning small angles

[BMWZ4]

View attachment 1306


Dear All,


I am encountering some angular dimensioning issue with WF2. For small angles (<1

 

[mudassirkhan]

Zoom as close as possible to the two lines in which u want to create angular dimension and try to place the dimension in between them. I hope it will work

 

[tdegroot]

You will have to set the config,pro option minimum_angle_dimension to the smallest angle you wish to dimension, then you will be able to zoom in and dimension it. For example:


minimum_angle_dimension .5


will let you dimension to one-half degree.

 

[burnsp]

You can also try creating the part with the angle much larger, say 10

 

[jrobi]

burnsp has provided a good workaround, but can result in failure of other features, champhers, or rounds, specifically. modify your min_ang_dim option to fix it properly.

 

[burnsp]

No problems if done within sketcher but the min_ang_dim is probably the best overall solution. Although, sometimes drawing thelarger anglecan beeasier -fewer issues with automatic constraints.