EV1 Fuel Injector model

[Brandon@FPW]

New here. I'm not sure if this is the right forum but I'm looking for a model of an EV1 automotive fuel injector. If someone knows where I might find this that would be great, rather not spend the time modeling it myself.

 

[design-engine]

is that what you seak?

Edited by: design-engine

 

[Brandon@FPW]

Hey,
The drawings are helpful but I'm really looking for a model that I can pull into Pro/E.

 

[[-Skint-]]

Bart was very helpful, surely you can model that in 5 minutes ? Its a revolve !

 

[Brandon@FPW]

Sure in five minutes I could crank out a basic model but if there is an exact model out there already that would be nice to have. Thought I'd ask to see if one was available.

Regardless the drawings are certainly good info. Thanks Bart.

 

[dr_gallup]

None of those is an EV 1. The top picture is a Multec 1. The left drawing is an EV 1.3 and the right drawing is correctly labeled as an EV 6.

An EV1 has a longer "fat" portion and does not have the big chamfer. You'll also notice that a lot of the dimensions on the EV 1.3 (mis labeled EV 1) are missing so you'll have to do some guessing.

I'll see if I can dig up something I can shrinkwrap & post. It might take a few days.

 

[Brandon@FPW]

None of those is an EV 1. The top picture is a Multec 1. The left drawing is an EV 1.3 and the right drawing is correctly labeled as an EV 6.

An EV1 has a longer "fat" portion and does not have the big chamfer. You'll also notice that a lot of the dimensions on the EV 1.3 (mis labeled EV 1) are missing so you'll have to do some guessing.

I'll see if I can dig up something I can shrinkwrap & post. It might take a few days.

Thanks, great info.

 

[dr_gallup]

This is an EV 1. Don't have a solid model, sorry.

 

[Brandon@FPW]

This is an EV 1. Don't have a solid model, sorry.

Hey thanks!