FP4 Dialog11 post processor

[fisa]

can some one recognize this format of g-code.is it possible to make post processor for this type of out put..from creo post processor..need help

%3001 ( -D11-000118- - -GENERAL DRILLING DR-14)
?
0953

%3001*T ( - -000050- - - )
T1 I/M:M R5 L0.000 FE100 FEU0 FZ70 FZU0 S400
?
0BD1

%3001*% ( -D11-000090- - -GENERAL DRILLING DR-14)
N20 G17 T1 M6; M3
N10 G0 Z50
N50 G0 X190 Y133
N55 %*1
N40 G0 Z50; M30
?
15E2

%3001*1 ( - -000038- - - )
N30 G83 TA-27 OA0 SI2 EA50 MI5 HI1
?
0B47


 

[precedm]

Hi Fisa,
Looks like Deckel with either their control or a Heidenhain.
I'm sure it's possible, but I need to research some info first.
Do you have a cnc control manual?

edmjay

 

[fisa]

Hi Fisa,
Looks like Deckel with either their control or a Heidenhain.
I'm sure it's possible, but I need to research some info first.
Do you have a cnc control manual?

edmjay

yes i have but in german language

 

[precedm]

Hi Fisa,
Well, that will not help me. I have some additional questions.
1. I'm going to assume you are using Pro/E and NC Machining Complete or Creo and Creo Mfg.
2. Do you have any post that gives something that the control recognizes?
3. Can you send me a hand written program that works?
4. Can you send me a drawing of a sample part, with no names, addresses or phone numbers?
5. Can the control read ISO format?
6. Can the control read EIA format?
7. Can you buy an English version of the programming manual in electronic format?
I might be willing to swap some post writing for the manual.

You can send this information to my email, [email protected].

Thank you,
Jay.