Geometric Tolerances in the Solid Model

[Ryan]

In wildfire 2.0, I have some geometric tolerances in a drawing of a part. Now, when I open the solid model of the part, the geometric tolerances show up in the 3-D model. The only way I can find to turn them off is to delete them from the drawing. Is there some simplebutton or config.pro option to not display geometric tolerances in a 3-D model, but still keep them in the drawing? I am also having the same problem with surface finish notes. <?:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" />

 

[Guest]

<DIV>You can place your GD&T datums on a layer and set the layer status to "blank" or "hide".</DIV>
<DIV></DIV>
<DIV>To turn off the notes, you can click Utilities > Environment and unchech the box that displays notes.</DIV>
<DIV></DIV>
<DIV>You can also set a config.pro option MODEL_NOTE_DISPLAY to NO. This will automatically turn off your notes when you start Pro/E.</DIV>

 

[Ryan]

Thanks for your reply Jason, but it still does not seem to have solved the problem with the surface finish notes. I have always had the MODEL_NOTE_DISPLAY to NO in my config.pro file and I even have tried turning notes off manually. Any other suggestions?

 

[Freecat]

Here is one way to get what you need:


2004-10-14_001219_Surface-finish-symbol.zip


You need a layer in boththe model, and the drawing that contain the items you want to hide. Works like a charm.


Richh

 

[Ryan]

Got it now. Thanks a lot!