how to create sketched features (toolkit)

[truestep]

I need to have cavities on model created programmatically. I have depth of cavity and points describing it form.I found in pro toolkit documentation how to create 2d sketch programmatically(here on my drive C:\Program Files\proeWildfire 2.0\protoolkit\protkdoc\manual0\sections.htm#190) , but it's not clear how to create Extrude with this sketch.


Can somebody provide me with working sample wich create cavity on first wall, through sketch, without asking me about to select something(maybe except the placement surface)? Or maybe there is another way to solve this?

 

[kishorev]

Hi,


Your requirement is valid one.As you are looking for with out asking about the slection of sketch plane and reference plane to provide the sketch.It is mandatory for you to provide the selection for two planes while doing the sketch with Pro-Toolkit.It is possible some extent for you with out explicit asking for refernce or sketch plane selection but your sketch is not always going to at same plane where you are going to provide the cavity.


I am not sure about the points tocreation ofa sketch.





With regards,


Kishore V