Ilink 3.4 F000 64bit

[ProEFan]

Hello,



I've one HP xw9300 with two AMD Opteron processors and 8GB Ram.

WF2 M200-64bit works great under WinXP64. Now I'd like to integrate
this WS in an Intralink 3.4 F000 area. The Ilink-Update to an official
by PTC supported 64bit version (3.4 M020 or better) is planed for mid
2007.

How can I get a solution do check in and check out of the Commonspace?

It's only for one WS.



Thanks

Steven

 

[ProEFan]

Hello
Extreme



Sorry, my
first post was not really clear. I meant, that in my company it is not possible
to update Ilink to M020/M030 before mid 2007.


That

 

[extreme]

What ever information you are looking at is incorrect.


ILINK 3.4 M020 is available NOW..not summer 2007. I am on 64bit WF2 M200 and, I just updated ILINK from M020 to M030, which is recommended for WF3.

 

[claplace]

Hi all !

We are running Wf2 M190 on 32 and 64 bits computers (dell 340 and dell 380).
We are running PRO/Intralink M020 in both of them (PTC does not officially support Intralink M020 on 64bits machines).

I don't know if the intralink F000 is working on 64bits plateform.
But in any case, I you want to install intralink from the install CDROM it will not work on a 64bits windows. So try to install the client on a 32bits windows including all the setting you need to have in your 64bits environment.
You now just have to copy the Intralink directory from your 32bits computer to the 64bits computer hard drive.

You should be able to launch prosetup.bat in the bin directory if ever some settings are wrong.

Hope it will work for you.

Chris.