missing view geometry

[dlugi04]

Hi


Can somebody help me

. I am working on quite complicaten drawing. I have changed a litle bit geametry of one of my machined groove. Very small modification. Then I updated views and message log apeared :The geometry which serves as the origin of the partial view "new_view_5", on sheet 1, is missing.


The geometry which serves as the origin of the partial view "new_view_6", on sheet 1, is missing.
The geometry which serves as the origin of the detailed view "A", on sheet 1, is missing.


Why it happend ? When I want to rapair it with teh use modifyview command, it does not work. I have to delete itand do it from the begining. I really irritated with this issue. It costs me a lot of work. I would be very gratefull if somebode can help me.


Reg.


Lukas


View attachment 604

 

[rvm_22in]

dlugi04,


This is a common error messages that occur.


What has happened is, while creating the partial/detailed views, u will select an origin for sketching the boundary.


So when u modify a gometry, the origin reference might have lost.


To resolve this, just : modify view/boundary/move origin point and select a new origin. the view gets updated.

 

[dlugi04]

thanks

 

[wachayu]

Pls give me more detail, I still don't understand how to deal
with

Thanks

 

[SRINIVASANIYER1]

I shall try and explain.
Let us say there is a block with a hole. The drawing while showing the details of the hole, has referenced the "EDGE" of the hole. Now when you suppress / delete the hole, the reference for the detail view is lost and you would get the error.



To correct this, Select the "Layout" tab.
Double click on the problem detail view. You would see a missing reference for the reference point on the parent view. Select a new Point and click OK.
The following picture should explain


View attachment 5688

 

[anatomcreview]

What has happened is, while creating the partial/detailed
views, u will select an origin for sketching the boundary.
so hard !


---------------------
led spot light
231.html">led spot light

 

[wachayu]

Thanks. SRINIVAS





YES, anatomcreview, you need to define origin first and boundary later.


When you create that,but for my case,I just click to define new origin.

 

[jeromess]

I use and LED light from a kit I just used, that worked
well. But I still have white-strips left from before
purchasing this kit. I was wondering if using the LED
light with my white-strips would help speed up their
regular process?



LED Spotlights
| panel-light">LED Panel Light |
bay-light">LED High Bay |
light">LED Track Lighting