Multi-Axis Scaling.....

[2kwik4u]

Hello all,


I've recently run into a problem that I can't seem to find a quick/easy way around. I need to scale a model in ONE axis.


I've imported a logo into a sketch, and created a protrusion from it. I realize now that the logo needs to be TALLER, but not Wider nor Thicker......I've used the modify-scale model command to get it to the correct general size, however I can not find a simple way to scale the protrusion in a single direction.


Is there an easy way this can be done, besides ALOT of redefining in the sketch?


Thanks in advance

 

[james.lynch]

you can use the Warp Command..


here is some information on it..


[url]http://www.imakenews.com/ptcexpress/e_article000466444.cfm?x =b11,0,w[/url]

 

[2kwik4u]

you can use the Warp Command..


here is some information on it..


http://www.imakenews.com/ptcexpress/e_article000466444.cfm?x =b11,0,w

It just occured to me that I left a VERY important piece of information out......I'm running Pro/E 2001. Why the company hasn't upgraded to wildfire I'm not sure, but sadly we I don't have the warpoption currently (or at least not to my knowledge since that link says it was introduced in wildfire, which is after 2001 I am told)......


Any other thoughts?


Thanks for the help.