Need Help with pattern

[skwasim_smile]

hiii,


Can u help me solve this problem,In the pic you can see the height of all the holes is maintained at 336.730, but the distance between them is different and I need to make 16 nos of holes of different dimension between them, My question is that can we achieve this feature using pattern option.


Thanks.


View attachment 3319

 

[vlad1979]

pattern table


or if you don't really need a pattern you can make all with a protrusion/cut
Edited by: vlad1979

 

[vlad1979]

not to leave a job unfinished:


you select the driving dimension, then choose pattern table and will look like this:


View attachment 3320


you have to enter values for index and the actual value.


pattern table works like a set of coordinates, so you have to calculate the position of all holes starting from the edge you dimensionned the first hole. You can't put the values that are between holes.


For the picture you posted the values should be like above.


(this works in both directions but since you need only one direction, you select only one dim)

 

[skwasim_smile]

hiii


thanks for the response vlad1979 u sloved my problem to great extent