Quilted Hidden Line Removal

[spschroeder]

I've got something weird going on here. I'm working with an upper-level assembly drawing and some cosmetic threads are coming through as purple wireframe outlines (even though they should be hidden). My config.pro has "yes" set for "hlr_for_quilts."


Here's the weird part...the lower-level drawing of this individual part does not display the cosmetic threads as purple wireframe outlines.


Any idea whymycosmetic threads are showing in the assembly drawing, and how can I get rid of them short of spending an hourerasing them from each view?


Thanks.

 

[elab.theken]

Probably the setting in the drawing .dtl file.


"hlr_for_threads" and "thread_standard" must be set appropriately there are also a couple of other settings that apply to cosmetics in cross-sections (check the drawing that is working the way you want and duplicate.)


Hope this helps.

 

[elab.theken]

You can also place all the cosmetics in the assembly on a layer and turn it off for the entire drawing.

 

[sip]

spschroeder


Have you tried view properties>view display>hidden line removal for quilts set to yes?


Sip