As we have several simular subassenblies, platforms/walkways in our E-Cranes, we use the "save a copy".
The only problem is now that in somethese copies, some assembly cuts need to be redefiend or even completely removed. Those cuts were made in an upper level assembly, but in WF2 I just can't seem to delete these cuts. Delete, all well, but on the next regenerate, they just re-apear. The only way I found, till now, is to surpress them in the assembly where they were made.
This means, opening some older projects (1 to 3 Gb memery use) surpres them , with the risk that if the same project isever needed again, some bolts will be surpressed => not correct BOM.
Anybody has any idea how to resolve this
proE thing.
Indusign
The only problem is now that in somethese copies, some assembly cuts need to be redefiend or even completely removed. Those cuts were made in an upper level assembly, but in WF2 I just can't seem to delete these cuts. Delete, all well, but on the next regenerate, they just re-apear. The only way I found, till now, is to surpress them in the assembly where they were made.
This means, opening some older projects (1 to 3 Gb memery use) surpres them , with the risk that if the same project isever needed again, some bolts will be surpressed => not correct BOM.
Anybody has any idea how to resolve this
Indusign