show suppressed objects

[Tudor]

Do you have any ideea how can I set the Settings - Model Tree - SHOW SUPPRESSED OBJECTS by default.


Is there a Pro/E option that does that?


Thanks!

 

[prohammy]

Take a look at this thread and see if it is what you want


Kev


http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=34 414&KW=tree+filter


EDIT


Remember, once you have changed the settings to finish with a Save Settings File and Save Model Tree
Edited by: prohammy

 

[Tudor]

The link provided by you is not working.





I know that this is possible because at the company were I worked last year (WF2.0) this option wasactivated by default.



Edited by: Tudor

 

[prohammy]

Oops,


[url]http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=34 414&PN=1[/url]


Kev

 

[ankarl]

Do as Kev suggest then save your settings to tree.cfg and add "mdl_tree_cfg_file J:\Pro\tree.cfg" to your config.pro


set path to whatever suits you

 

[Tudor]

I solved the problem by myself:


After selecting the settings you want, (in this case suppressed features)and selecting ok, click "save settings file". save this file to your desired location. This will create a file named tree.cfg. Next, edit your config.pro file adding the line:

mdl_tree_cfg_file (input the path to the file here)\tree.cfg.


This will keep the settings you want upon re-start of Wildfire.


Last minute edit: I haven't seen the last two posts. Thank you!
Edited by: Tudor