TEXT ON CIRCULAR OR UNEVEN SURFACE

[skwasim_smile]

Hiii


I just wanna know how can we create text on circular or uneven iam really for not searching thru pages but response with images will be appreciated


thanks in advance

 

[Israr]

There is one tutorial available on www.caddigest.com/subjects/pro_engineer/tutorials_proe.htm





Israr

 

[mesaksham]

What U can do Is Extrude the text on some plane and then project it onto that surface. project command is in edit menu

 

[CPiotrowski]

offset the surface you want the text on. Protrude the text through the original surface to the projected surface. Thats how I do it.

 

[skwasim_smile]

hiiii


i tried it out with see the pic attached plz tell me iam on the right path iam kind of getting confused wat CP told plz can u be more specific abt the matter and example with the pic will be greatly appreciated 2006-01-15_233041_TEXT.rar


thank u

 

[skwasim_smile]

2006-01-15_233635_TEXT.rar

 

[Israr]

No, what are doing is wrong. Because theprojected entity is a curve and you can't extrude it.


The corrrect procedure is given in this link.


http://proe.com/feature_full.php?cpfeatureid=6444


click on this link and you will find the tutorial.


Israr

 

[CPiotrowski]

No, what are doing is wrong. Because theprojected entity is a curve and you can't extrude it.


The corrrect procedure is given in this link.


http://proe.com/feature_full.php?cpfeatureid=6444


click on this link and you will find the tutorial.


Israr

The projected entity is a surface, text will extrude to a surface.

 

[telecomguy]

This article may help as well...


[url]http://www.mcadcentral.com/articles/templates/proe.asp?artic leid=15&zoneid=2[/url]


<tg>

 

[skwasim_smile]

hiiiiiiiii


Thanks ISRAR and TELECOMGUY for the links i will surely look forward into it

 

[appinmi]

On the top toolbar, select "Edit", then "Project". When the "Project" panel opens up, pick on the "reference" tab. It defaults to "Project chain", but you can pick the "down" arrow and change it to "Project sketch". Now pick the "sketch" button. When selecting the "sketch plane", make sure it is not tangent to the sufaces you are projecting to. Once in sketcher, on top toolbar select, "sketch", then "text. Type in your text, select the font that you wish, change size, etc. When done in sketcher, select the surfaces to project to. Pick on the sketch plane for the direction, and your done.