Cosmetics - yes I know nobody like them

[Jacoolo]

Hello



I really would like to not have this problem, ahhh....



Ok. There is a drawing with a view of simple shaft.



The shaft has two cosmetic threads from each side. On one of them the cosmetic is shown on other nor. Look at picture.

Anybody has idea why?



View attachment 1823

 

[xriddler]

hi, try to change the view orientation, for example if you've choose top view, try with the front view.
Bye !
Giorgio

 

[Jacoolo]

thanksa xriddler


the problem is already solved


it occured that the thread surface was choosen from chamfer


as you can see at the screen there is a chamfer at the beggining of shaft


this chamfer was made before codmetic


unfortunately chamfer was choosen as the thread surface and that is the cause of the problem

 

[AHA-D]

Which makes cosmetic thread a really SMART feature if you can apply it to a conical surface !


Alex

 

[xriddler]

thanksa xriddler


the problem is already solved


it occured that the thread surface was choosen from chamfer


as you can see at the screen there is a chamfer at the beggining of shaft


this chamfer was made before codmetic


unfortunately chamfer was choosen as the thread surface and that is the cause of the problem

I was thinkin the same, but it was strange that the thread was not shown from the chamfer to the middle of the item...
In any case, it was solved !

 

[Jacoolo]

Yea





at least(it seems) one thing that is not directly fault of cometic feature)))