cross hatch datum curve

[bigmac]

I have a drawing with an iso view on it. There are 3 circular datum curves on it that are x-hatched. I don't want the curves or the x-hatch shown in the iso view. I hid the curves in the layer list for the iso view. The curves disappear but the x-hatch remains shown. Does anyone know how to hide the x-hatch also? Using WF4. Also this drawing is of a merged part, (Casting / Machined). It's the merged, (machined) part drawing that is giving me problems. TIA for your help.



Edited by: bigmac

 

[kmdoss1974]

Hi
Can you put your images to answer your question.

 

[dr_gallup]

I didn't think you could x-hatchdatum curves. Are you sure they are not cosmetic features? You can show/erase cosmetic features by view.

 

[bigmac]

These are datum curves, (circles). The way I x-hatched them is after I made them I did an "edit definition". Then click on "sketch" from the tool bar, then pick "sketch setup". A sketch dialog box opens up with a "Placement" and "Properties" tab. Pick the 'Properties" tab. There is an option there to x-hatch. Pick the x-hatch box and then set the spacing of the x-hatch.