Cross-section width

[riyaz_khan]

Can anyone help me out how to increase the Cross-section width in a pro-e drawing?





Thank you,


Riyaz.

 

[jabbadeus]

Select the cross-hatching (the cross-hatching only), right mouse click and hold, and choose Properties. From the menu manager choose Spacing and then Half, Double, or Value as appropriate to change the width.

 

[riyaz_khan]

Dear I am not talking about in Model,i am asking how to increase cross section Line width in pro-e drawing .


Riyaz.

 

[riyaz_khan]

I m making my question more clear ,how to increase cross section Line width not cross hatching line width)in pro-e drawing .

 

[vlad1979]

Hi,


line style / width


View attachment 2761

 

[riyaz_khan]

I m making my question more clear with the attached image,how to increase cross section Line width not cross hatching line width)in pro-e drawing ?



View attachment 2762

 

[SRINIVASANIYER1]

file > properties > Drawing Options > cutting_line > Std_Ansi or Std_ISO or whatever...


Cutting_line_segment > (say) 6mm.


Thickness may not show on screen but will print....

 

[riyaz_khan]

Thank you Srini.


But When i am doing the same,print is coming with the unchanged width, its not changing.


Is there any other wayby whichwe can increase the line width on the screen itself as well as in print also?

 

[SRINIVASANIYER1]

proe prints according to the line colors. However for the cutting line, it is different. when set to ISO, the ends are thicker (provided cutting_line_segment > 0 atleast 5mm) and for an offset section, the portions where the offset takes place is thicker.


If you set the cutting_line to ansi standard the complete line would be thicker. however the line type would be Phantom and not Centerline.


You may choose accordingly

 

[SRINIVASANIYER1]

try setting cutting_line_segment = 5000mm.


This will set the whole line thicker.

 

[riyaz_khan]

Thank you Srini.