Drawing view scale

[sridarank]

actually iam doing design automation<div>9:44 AMso i will link proe with excel</div><div>so i will give value in excel sheet that automatically updated in proe model</div><div>that ok</div><div>9:45 AMbut in drawing</div><div>when i come to drwing when dim values changes view size also changing</div><div>9:46 AMfor me i dont want to change the view size but dimensions should change?</div><div>what we can do?</div><div>i need view scale should be same</div><div>9:47 AMbut in the view dimension should update


</div>

 

[rajeshshan]

hi,


the view scale is based on the drawing scale. but how view size?


i understand that the view size u mean is drawing view, when selected its extends actual geometry. is this is the case there may be come csys ouside the model this u can fix by making partial view.


if this is not the case please explain.

 

[nawaz]

<H1>To Set the Size of the Drawing View</H1>

1. 
   <LI =kadov-p-CTopic-Text-Numbered>
   Determine the edge that you want to use as the basis for setting the drawing_scale_factor. Pro/ENGINEER uses the dimension value and the length of this edge in the drawing to calculate it. Whenever you change either one of these variables ("length" or d#), it calculates the length of model edges according to the following equation:</LI>

length in the view = (dimension value) x(drawing_scale_factor) x (drawing_scale)

1. 
   <LI =kadov-p-CTopic-Text-Numbered>
   Add the following relation to the part or assembly:</LI>

drawing_scale_factor = length / dimension
where length is the parameter corresponding to the current drawing measurement of the above dimension d#, and dimension is a model dimension, d#.

1. 
   <LI =kadov-p-CTopic-Text-Numbered>
   Regenerate the model.</LI>

this info i am giving you from help file.

 

[nawaz]

Dear Sridarank,


By the way i would like to know how you are linking Pro/E with EXCEL. Even I have done a good amount of automation thru' Pro/Program. I am using WF3.0. Pls let me know.