Getting Radius dims to show Horizontally

[muks11]

Hello all,


Does anyone know how to get radius dimensions on drawings to show horizontally as default. I have set config for diam dimensions but cant find one for radius.

 

[muks11]

Ok, I managed to get radius dims to show horizontally by changing 'Text Orientation' to horizontal but now Diameter dims show at an angle. I had the config set to 'iso_parallel_diam_horiz' before.


Does anyone know how to get both to show horizontally??????

 

[mudassirkhan]

Use a parametric note.
Best regards,

 

[write2bush]

Hi,


Has Anybody tried it in WF-3. It was expected to be included in WF3.

 

[Zaki]

PARALLAL_DIAM_HORIZ IS WORKING PROPERLY IN WF2, ITS NOT A MATTER.

 

[write2bush]

can you just provide us a image of such dim in wf.2. Sorry for making you work. Because i have not tried it in wf2.

 

[write2bush]

View attachment 2427


hi, Zaki,


This is what i ment, with Settings


parallel_dim_placement set as above


text_orientation set as parallel, we want the radial dim to apear as i have hand marked in the above image.

 

[muks11]

Hi guys,


Heres the problem I'm having.


I have text orientation set to 'iso_parallel_diam_hori


parallel_dim_placement set to 'above'





View attachment 2428z'

 

[write2bush]

yes thats the problem.


so i just wanted to know weather or not wf3 can solve it.

 

[write2bush]

Sorry Muff.


I did not answered you. We cannot solve your problem, not even in WF2.


so as mudassirkhan has suggested use a parametric note. you should type R&d26


were d26 is the number of dim.


All the best.

 

[sumeet_k29]

i THINK YOU NEED TO REFER TO THE FOLLOWING CONFIG SETTINT. THIS WILL CHANGE YOUR RADIUS STYLE AS YOU ARE LOOKING FOR. THE CONFIG OPTION IS "TEXT_ORIENTATION" IF YOU SELECT PARALLEL OPTION YOU WILL GET THE DESIRED RESULTS


View attachment 2443


I HOPE THIS SOLVES YOUR PROBLEM

 

[muks11]

I dont think you understand what I'm trying to do. I'm trying to get both diam and rads to show horizontally while dimension text remains parallel like below. I can get both diams and rads to show horizontally using 'Horizontal' in the config setting but all dims show horizontal.





View attachment 2444