Join our MCAD Central community forums, the largest resource for MCAD (Mechanical Computer-Aided Design) professionals, including files, forums, jobs, articles, calendar, and more.
They have a nice example of how to do this in a free online PTC Training Class on Surfacing tricks.
The result will be a winding cord around a random curve path much like a old style telephone spiral cord which is much like what you are looking for.
4 steps.
1) Create your general curve path which can be be conceived via using "intersect" of 2 different Sketch features (curves) in 2 different normal planes (like the Front and Right Datums for example). You'll want the resulting geometry to be a tangent contiguous smooth path though otherwise the following sweeps will likely fail. The result will be a 3D wandering path of your design.
2) Create a Variable Section Sweep along this path using the surface option. Sketch a section projected normal to this path which will just be a line radiating from this center point with an angle dimension of zero. The length of the line is the radius of your spiraling cord. Then you just put in a sketcher relation "angle_sd0_dim = 360 *num_of_revolutions * trajpar". Trajpar is a system variable which will vary from 0 to 1. If all goes well, the result will be a "ribbon" which spiral around the original main path.
3) Create another Variable Section Sweep along the edge of the ribbon. If it's a spiraling cord, then the section is just a circle. Be careful that the resulting geometry does not self intersect (ProE doesn't like that).
4) Hide the ribbon surface (put on a layer and blank it).
i am not just talking about one direction. think about a brand new roll of kite string that has been wound back and forth over and overon top of itself. Edited by: megaladon
Look up this link at E-cognition. Though it is not about
the reel, the contents would give you an idea.
<a href="http://www.e-
<br / target="_blank">cognition.net/pages/DatumGraph.html">http://www.e-
cognition.net/pages/DatumGraph.html</a>
I would probably do that cable in 2 steps, first the "inner" then the outer using VSS method. I dont see any reason to do any other revs inside the "inner" since you never see them anyway. The outer would preferebly been done with 2 relations or1 graph and1 relationso you can make it look like it starts at one diameter and expands so its ontop of the inner cable after a couple of revs...
Oh come on. You have to do all the layers so the mass properties and BOM are correct!
Just kidding. I would never do any of that, a pictorial representation is all that's required, just like for springs, screw threads and myriad other complex geometries that needlessly complicate things and add no value.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.