Model Tree empty

[harichennai]

Hi all,


My model tree is empty with no features, but the model is present in the graphics area, this happened whe i tried ot redorder some quilts in my big model..


I run WF2.0 M130.


Thanks

 

[rmatija]

2006-02-10_115100_tree.zip


Hi


Edit tree configuration ot try wit this

 

[harichennai]

Hi,


It is not an issue with features not shown in model tree, but there is no feature in the model...

 

[Isair]

If there is no feature in model, then the model is empty; no datum planes, axis, CSO.

 

[ProEMasterYoda]

View attachment 1779

 

[mudassirkhan]

Check if the features are inserted into any layers and the layers are hidden by any chance.


Regards,

 

[harichennai]

2006-02-13_113334_mcad.ziphttp://mcadcentral.com/proe/forum/uploads/harichennai/2006-02-13_112835_mcad.zip


Please check the attachment, you can find that the model tree is empty, even though all the layers are unblanked, and eventhough the tree filter settings is set as suggested by ProE Master Yoda.


Thanks



Edited by: harichennai

 

[arroyopr]

Did you try your conf.pro





View attachment 1803

 

[jeff4136]

> ... this happened whe i tried ot
> redorder some quilts in my big model..

Hope you have a backup copy.

(As far as I know) Blanking layers has no effect on features showing in model tree.

Are you sure you have the Master Rep of the model loaded?

Menu: Info, Model. What's it say?

 

[harichennai]

Yes, I have a back up and already recovered from that loss, but only due to rework and not by solving.


Yes, it is Master Rep and also the option model_tree_start is set to yes.


also the info-> model does not show any feature in the list, only 3 cross sections created.


Any body can help in this?


Thanks in advance!!

 

[jeff4136]

Can you post the model? Or, better yet; get it to PTC? Empty feature list and xsecs doesn't make any sense to me(for what little that's worth).

 

[harichennai]

Jeff,


I have asked help from PTC, but this is a issue which can cause trouble later..and there is no TAN for it...


I will update this thread when the solution or cause for the problem is found..


THanks all...

 

[tran tuan]

Try double click name file part in model tree?

 

[harichennai]

Hi,


It is not a hide situation, it is seriously that the model has the full geometry but it has no features, like u can say that it behaves like an imported geometry..


Any ideas, any one?


Thanks

 

[jeff4136]

Still no really good ideas, but wonder what might happen if you run Model Player or Feature Operations, Suppress, Range (see if anything shows?) and then Resume All. Might sort itself out or just crash and burn.

Does anything show up in Layers?


Edited by: jeff4136

 

[Isair]

Harichennai


Few things you should answer first and try.
Was that part completely created with ProE, from firs feature to last?
Was you the one who modeled it?


If so try to open previous versions of part (I hope you didn't purge directory)to see if is there any features in model tree in previous model.


Also try to run ProE without any configs (go to directory where proe is installed, go to bin directory run file proe.exe ), then try to open again your part and see if anything happens.


You should also try method that Jeff described.


Hope you will find solution.

 

[Speling]

To me is interesting next - can you continue work on that part

 

[extreme]

Did you collapse the tree?


This can happen with the menu selection or by doube clicking on the main model in the tree..


See attached video2006-02-18_184602_model_tree_collapse.zip

 

[harichennai]

Hi all,


This gets interesting...I am summarising the answers asked by all of you


Does anything show up in Layers?


No, after i unhide all layers, only 3 datum planes show up..


Was that part completely created with ProE, from firs feature to last?
Was you the one who modeled it?


Yes, and i did notdo it.I am supposed to solvedthis problem..


If so try to open previous versions of part (I hope you didn't purge directory)to see if is there any features in model tree in previous model.


Yes, the version of the model before this mishap is OK with all the features in model tree..


Also try to run ProE without any configs (go to directory where proe is installed, go to bin directory run file proe.exe ), then try to open again your part and see if anything happens.


with proe with no config, still the same, also with next date codes..(mine is M130, I tried with M171 and M181)


but wonder what might happen if you run Model Player or Feature Operations, Suppress, Range (see if anything shows?) and then Resume All.


The model player Icon is greyed out,


I could add only datums,and extrudes..I could not add rounds, fillets...


once i add such extrude, the goemtery of hte actual model vanishes..


also, one info is that once I create any datum plane, the feometry vanishes from graphics window, and model mass is zero!!


Also If I suppress the datum plane, the geometry (original model) vanishes,


If I resume the plane(it succeeds), geometry does not reappear!! My guess is that the goemtry is also suppressed in that case and could not be selected to resume(I cannot use reusme all, as the option is not shown)..


Second idea is

 

[dross]

You want help? Don't pass a solution as trivial, try it.


I've ran into the same issue, there are two ways to fix it:


Double-click on the model name in the model tree. Or, "Show" - "Expand All" in the model tree.