Number of holes

[Babeesh.g]

Hi Guys


I am looking for an option which will give me number of holes (made either by hole feature or by extrude cut).


I tried using Hole table, But it's not giving me the number of holes


Please give your suggetions

 

[SRINIVASANIYER1]

Create a pattern of holes. You would then get the number of holes.

 

[Babeesh.g]

Hi Srini


I agree this will give number of holes,But what I am looking here is to capture the number of holes with same diameter in to the drawing sheet.Holes may either patterned or distributed allover

 

[SRINIVASANIYER1]

Use the Hole table with Alfanumeric numbering. Thus say
for a dia 8 hole, you may get the names as A1, A2,
A3...An. where n is the number of holes of dia 8.

 

[srieger]

In order to use the hole table, all holes must be hole features.

 

[Babeesh.g]

caan we use pro promme to find the number of holes?

 

[kdem]

In order to use the hole table, all holes must be hole features.

It may depend on the version your using but you can include holes created as extruded or revolved cuts in a hole table. In WF5 there is a selection for cuts on the table dialog box.