Repeat Region for Family Table

[shkantor]

For the life of me I can't seem to create a repeat region for my family table members. I have a Generic and many Part_no and Dash_no made from the Generic (length and width). I have seen some posts but they don't apply to me or I am not doing something right. Any help? Thanks in advance.

 

[sumeet_k29]

Can you please provide some more details about your problem. Does your drawing have views for more than one model??

 

[shkantor]

Thanks for the reply! I generate a "generic" decal and the family table members have
different text and the size, width x height of the decal varies. I would like to eliminate the drawing views of each instance and instead have a bill of material with each instance listed.
The bill would also have the size of the decal and the text or wording on it included also.

Regards,

 

[sumeet_k29]

So inorder to show the BOM, all parts will have to be assembledunder anassembly. When you will place the BOM you will get the description of all individual parts. As you have mentioned that you want to eliminate views of each instance there is one thing that can be deone if you want to show the views of these instances. Create simplified reps of the assembly for the parts you wish to show , this way you will also have the views for those instances.

 

[Dell_Boy]

shkantor to put it bluntly, I don't think fork_sk understands the question.


I created it years ago, but try reading this table into your drawing and it should start you in the right direction.


DB


2006-07-14_092834_family.tbl.zip
Edited by: Dell_Boy

 

[Isair]

Here is link where I have described how to create repeat region of FT members:
[url]http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=27 270&PN=1[/url]


With filters you control what you want to be displayed in table.